Skip to main content
Wescover has transitioned to an inquiry only platform.
Please refer to
our FAQs for more details.
Customizable
Aztec Alliance Ceiling Drum | Flush Mounts by Robin Ann Meyer. Item composed of fabric & metal compatible with minimalism and contemporary style
Trade Member Offer Available
Customize this piece
Aztec Alliance Ceiling Drum | Flush Mounts by Robin Ann Meyer. Item composed of fabric & metal compatible with minimalism and contemporary style
Aztec Alliance Ceiling Drum | Flush Mounts by Robin Ann Meyer. Item composed of fabric & metal compatible with minimalism and contemporary style
Aztec Alliance Ceiling Drum | Flush Mounts by Robin Ann Meyer. Item composed of fabric & metal compatible with minimalism and contemporary style
Aztec Alliance Ceiling Drum | Flush Mounts by Robin Ann Meyer. Item composed of fabric & metal compatible with minimalism and contemporary style
Aztec Alliance Ceiling Drum | Flush Mounts by Robin Ann Meyer. Item composed of fabric & metal compatible with minimalism and contemporary style
+1
Aztec Alliance Ceiling Drum | Flush Mounts by Robin Ann Meyer. Item composed of fabric & metal compatible with minimalism and contemporary style

Created and Sold by Robin Ann Meyer

Robin Ann Meyer

Aztec Alliance Ceiling Drum - Flush Mounts

Free Shipping

Price from $161 to $184

Creation: 2 weeks
Shipping: UPS 2-5 days
Estimated Arrival: July 12, 2024

Handmade

Woman Owned

Sustainable

Made In USA

Made To Order

Natural Materials

DimensionsWeight
9H x 12W x 12D in
22.86H x 30.48W x 30.48D cm
11H x 16W x 16D in
27.94H x 40.64W x 40.64D cm

The strong geometric shapes are engineered to wrap around the lampshade in a seamless pattern. All angles are pleasing to the eye!

Assembly & Installation Instructions (Youtube Instructional Video link: https://www.youtube.com/watch?v=kcYu9pbgCjc&t=6s)

Part I: Fixture Assembly:
1. Connect the wires to the socket by feeding them through the connector holes in back of the socket
- the black wire connects to the hot contact (brass colored)
- the white wire connect to the neutral contact (silver colored)
(use a continuity checker to verify the wires are connected to the right pathway)
2. Feed the socket cover through the other end of the wire and connect it to the socket
3. Screw the 1” metal nipple into the socket
4. Run the wire through the drum shade spider ring
5. Next the flush mount goes through the wire. Rest it dish side up on the spider ring
6. Run the star-lock washer through the wire until it sits on the flush mount
7. Secure the socket and the flush mount to the drum shade with the 1/2” nut. Tighten it using your wrench or pliers. It should not be loose.
8. Cut the wire to length. Leave at least 6”

Part II House Install:
9. Secure the bracket to the ceiling can-light using the
two 8/32“ screws
10. Connect the fixture to the house wiring
- the black wire connects to the hot contact
- the white wire connect to the neutral contact
- resecure with the wire nut and electrical tape
(use a continuity checker to verify the wires are connected to the right pathway)
11. Secure the flush mount to the bracket on either side using the two 6/32” screws
12. Screw in the light bulb
13. Peel both sides of the diffuser bottom protection layer off.
14. Feed the diffuser bottom through the drum shade and rest it on the bottom ring. Adjust as needed using the suction cups to pull the diffuser down.
15. Turn on the circuit and ENJOY!

Care Instructions
Dust with a clean dry cloth
Avoid harsh chemicals if cleaning to protect the finish

IMPORTANT: Always turn off at the circuit to the light before installing

Return Policy
Each lamp shade is custom printed and made per order, therefore not allowing me to take returns.
If there are any issues with your purchase please contact me directly. I want you to be happy!

Item Aztec Alliance Ceiling Drum
Created by Robin Ann Meyer
As seen in Creator's Studio, Minneapolis, MN
Have more questions about this item?
Robin Ann Meyer
Meet the Creator
Wescover creator since 2022
I let life inspire my pattern designs. From there it could end up as a wallcovering or any home decor item!

I think of myself as an artist and then a product designer. Like artists of centuries past I find inspiration in the world around me. From global treks to local fresh cut bouquets, nature and architecture fuel my passion for design. My parents recognized my artistic interest early and encouraged this in me. I studied art and design in Europe. Once back stateside, I worked as a textile designer in the NYC home fashion industry before relocating to Minnesota with my husband. Minnesota has welcomed us and truly inspired my work. It was here I knew I could start the print studio and launch my line. I am motivated by not just the community of artists I have found but the Twin Cities and state itself. Nature abounds from Three River Parks to the miles of lakes and biking paths.